KP-2.0 wheel chipper composite
Product features
-
Material
- Composite
-
Length
- 2000 mm
-
Width
- 150 mm
-
Height
- 110 mm
-
Number of attachment points
- 4 things.
-
Operating temperature
- -60С to +60С
-
Number of reflective elements
- 8 pieces.
-
Wheel color
- black
-
Reflective color
- yellow
Transport characteristics
-
Weight
- 21,6 kg
-
Estimated volume of 1 piece
- 0,03 m³
-
Type of packaging
- On a pallet in stretch film, tightened with tie strap
-
Number of pieces on a pallet
- 28 pieces (56 halves)
The product is made of composite material. On each side, it is equipped with four reflectors in the form of yellow beveled rhombuses to improve visibility in low light conditions.
In cross section, the product has a trapezoidal shape, providing for the most optimal contact spot with the tread of the car wheel. For the convenience of storage, transportation and installation, the wheel chipper is made in the form of two identical parts 1000 mm long, with 15 mm protrusions at the junction. Two parts are assembled during installation at the facility. The wheel chipper is equipped with four holes for attaching it to the surface using anchor bolts. If necessary, the mounting holes can be protected with special plugs.
Benefits and Technology
- The trapezoidal shape provides an optimum spot of contact with the car
- Withstands high loads
- It does not harm the wheels of a car in a collision
- Increased nighttime visibility with reflective elements!
- Does not require constant painting
- Not subject to corrosion
- Withstands sudden changes in temperature
- Aesthetic appearance
- Easy product care
- Convenient designation of parking spaces. 1 chipper = 1 parking space
- Strong protection of cars from damage at your facility!
- 5 years service life
- Warranty for retroreflectors 2 years!
Get wheel chippers in the TECHNOLOGY PC
-
Own production - even if the goods are not available, we can quickly produce the required volume of wheel chippers.
-
Warranty - we, as a manufacturer, give a factory warranty on products.
-
Low prices - we ourselves produce rubber wheel chippers, so you get the goods at a bargain price directly from production.
-
Discount - in addition to this, you can get a discount on wholesale. Our price lists prices for purchases from 100 thousand rubles. and from 500 thousand rubles.
Usage
Wheel chippers are widely used in the equipment of parking lots, car parks and loading rooms. They perform demarcation functions, prevent collisions between cars, protect the walls of the room. Wheel chippers are installed 1 piece per parking space. Also used as delinators.
These products are essential elements for car maintenance services and enterprises where goods are transported.
Installation
Recommendations
The main purpose of the wheel chipper is to increase safety at the facility, therefore we recommend using anchor bolts (for asphalt pavement) or screw dowels (for concrete pavement) complete with washers for mounting, for greater fastening strength. You can find them in related products.
Installation steps:
- smooth surface
- mark holes for anchoring
- make high-quality drilling of holes
- unscrew the nut from the bolt
- put the washer on the bolt from the side where the thread is applied (see mounting diagram)
- put the nut on the bolt with the “hat” down, leaving free space for the washer
- drive the bolt into the mounting hole of the deliniator / wheel chipper
- tighten the nut on the bolt until its “hat” and washer fit snugly against the base of the mounting hole
- wheel chuck securely locked
- колесоотбойник надежно зафиксирован
