Traffic and Parking management tools

Wheel bumper KP-0.55 (Russia)

The product is made of composite material. Yellow reflectors are placed on the sides to improve visibility in low light conditions.

Product features

Material
Composite
Length
550 mm
Width
150 mm
Height
100 mm

Transport characteristics

Weight
6 kg
Estimated volume of 1 piece
0,009 m³
Type of packaging
On a pallet in stretch film
Hard packing
Not required

The product is made of composite material. Yellow reflectors are placed on the sides to improve visibility in low light conditions.

Reflectors are firmly fixed to the surface of the product in special recesses. The wheel baffle is trapezoidal. This form provides the most optimal contact spot with the tread of the car wheel.

The wheel chipper is equipped with two holes for attaching it to the surface using anchor bolts.

Benefits and Technology

  • Optimum contact spot with the car
  • Withstands high loads
  • It does not harm the wheels of a car in a collision
  • Does not require constant painting
  • Not subject to corrosion
  • Withstands sudden changes in temperature
  • Aesthetic appearance
  • Easy product care

Get wheel chippers in the TECHNOLOGY PC

  • Own production - even if the goods are not available, we can quickly produce the required volume of wheel chippers.

  • Warranty - we, as a manufacturer, give a factory warranty on products.

  • Low prices - we ourselves produce rubber wheel chippers, so you get the goods at a bargain price directly from production.

  • Discount - in addition to this, you can get a discount on wholesale. Our price lists prices for purchases from 100 thousand rubles. and from 500 thousand rubles.



See wholesale prices  

Product features

Material
Composite
Length
550 mm
Width
150 mm
Height
100 mm
Number of attachment points
2 pcs.
Operating temperature
-50С to +60С
Number of reflective elements
2 pcs.

Transport characteristics

Weight
6 kg
Estimated volume of 1 piece
0,009 m³
Type of packaging
On a pallet in stretch film
Hard packing
Not required

Wheel chippers are widely used in the equipment of parking lots, car parks and loading rooms. They perform demarcation functions, prevent collisions between cars, protect the walls of the room. Also used as delinators.

These products are essential elements for car maintenance services and enterprises where goods are transported.

Recommendations

The main purpose of the wheel chipper is to increase safety at the facility, therefore we recommend using anchor bolts (for asphalt pavement) or screw dowels (for concrete pavement) complete with washers for mounting, for greater fastening strength. You can find them in related products.

Installation steps:

  1. smooth surface
  2. mark holes for anchoring
  3. make high-quality drilling of holes
  4. unscrew the nut from the bolt
  5. put the washer on the bolt from the side where the thread is applied (see mounting diagram)
  6. put the nut on the bolt with the “hat” down, leaving free space for the washer
  7. drive the bolt into the mounting hole of the deliniator / wheel chipper
  8. tighten the nut on the bolt until its “hat” and washer fit snugly against the base of the mounting hole
  9. wheel chuck securely locked

Mounting scheme - in the picture.

Do you already have a list of what is needed?

Send a request by attaching a file with a list of products, or just contact us, and our specialist will give you detailed consultation and will answer all your questions.