Traffic and Parking management tools

Speed bump IDN-300-1 Middle element

IDN-300 is an ideal solution for use in parking lots, garages, in yards, in adjacent territories, since in these cases compliance with GOST products is not required.

Product features

Material
high impact rubber
Length
300 mm (for moving)
Width
500 mm
Height
37 mm

Transport characteristics

Weight
6 kg (±10%)
Estimated volume 1 pc.
0,006 m³
Hard packing
Not required
Type of packaging
Unpacked by piece

Artificial road roughness IDN 300 is made of high quality impact resistant rubber. On the outer surface of the elements there are spherical protrusions for excellent traction with car tires. The lower part of the product has a tread that provides proper drainage.

IDN-300 is an ideal solution for use in parking lots, garages, in yards, in adjacent territories, since in these cases compliance with GOST products is not required.

Benefits and Technology

  • It has a reduced width compared to similar products, which allows you to make a product with a budget price
  • Has a reflective element that increases visibility with the dark
  • Has a reinforced mount in the form of a metal disk instead of a washer, which eliminates the tearing of the product from the roadway
  • Material - durable hard rubber in black
  • The tongue-and-groove connection ensures structural integrity when assembling elements
  • The presence of convex irregularities on the surface of the product improves adhesion to the tires of the machines, preventing them from slipping

Get rubber "Speed ​​bumps" in the PC "TECHNOLOGY"

  • Favorable prices - optimal price / quality ratio.

  • Own production - We will produce the right amount of IDN for your request.

  • Delivery - our logistics department will select the most optimal product delivery option for you.

  • Discount - in addition to this, you can get a discount on purchases from 100. thousand rubles.

Product features

Material
high impact rubber
Length
300 mm (for moving)
Width
500 mm
Height
37 mm
Number of mounting holes
4
Diameter of mounting hole
11 mm
Operating temperature
-50С to +60С
Light reflection
1 element
Dimensions of one reflective sticker
155х120 mm
Steel cord reinforcement
no
Reinforcing mounting holes
yes

Transport characteristics

Weight
6 kg (±10%)
Estimated volume 1 pc.
0,006 m³
Hard packing
Not required
Type of packaging
Unpacked by piece

Recommendations on fixture

In 99% of cases, the fastening of IDN is made in an asphalt concrete pavement, the confident attachment to which is a very problematic task. This is due to the softness of the material, especially in the summer. In the catalogs of manufacturers of fasteners there are no special models for asphalt, so our company, together with a number of leading manufacturers of fasteners such as Fischer, Sormat, as well as numerous installation organizations in different regions, for several years tried various types of fasteners IDN. Today, there are two fundamentally different types of fastening: mechanical and chemical.

Chemical type:

A 2-component composition is introduced into the hole drilled in asphalt, with a hardening time of 10 minutes to 1 hour. IDN holder is any metal pin, bolt or screw inserted into the hole with the adhesive.

Advantages: Reliable enough fastening with 100% filling of all cavities in the drilled hole.

Disadvantages: Installation requiring good qualification of installers (a rarity for many structures such as GOSSMEP ..). Long curing time. High price.

Mechanical type:

1. Wedge anchor.

Клиновой анкер

The most common type of mount. There are many manufacturers. When completing our own products, we have been using Fischer and Sormat for 6 years. In accordance with GOST asphalt pavement, the wedge anchors of these manufacturers are good. The cost of analogues from China and Taiwan is lower by 30-40%, but we can not say anything about their quality and reliability. Recommended size: diameter 10-12mm, length 90-120mm, head type - bolt-on.

Advantages: Simplicity and speed of installation.

Disadvantages: In loose asphalt insufficient degree of wedging, because their main purpose is concrete.

2. Screw and dowel.

Шуруп и дюбель

Also a commonly used type of mount. The dowel can be used both metal (for aerated concrete), and polyethylene. With high-quality asphalt, you can safely use them, significantly saving on the cost of fasteners.

Advantages: Simplicity and speed of installation, price, the possibility of subsequent tightening.

Disadvantages: Insufficient degree of wedging. 

Do you already have a list of what is needed?

Send a request by attaching a file with a list of products, or just contact us, and our specialist will give you detailed consultation and will answer all your questions.