Shaped monolithic product made of impact-resistant black rubber. On each side, the product is equipped with two long yellow reflectors to improve visibility in low light conditions.
Reflectors are firmly fixed to the surface of the product in special recesses using the original adhesive composition, resistant to various deformations, humidity and temperature fluctuations. In cross section, the product has a trapezoidal shape, providing for the most optimal contact spot with the tread of the car wheel.
The wheel chipper is equipped with four holes for attaching it to the surface using anchor bolts. If necessary, the mounting holes can be protected with special plugs.
Own production - even if the goods are not available, we can quickly produce the required volume of wheel chippers.
Warranty - we, as a manufacturer, give a factory warranty on products.
Low prices - we ourselves produce rubber wheel chippers, so you get the goods at a bargain price directly from production.
Discount - in addition to this, you can get a discount on wholesale. Our price lists prices for purchases from 100 thousand rubles. and from 500 thousand rubles.
Wheel chippers are widely used in the equipment of parking lots, car parks and loading rooms. They perform demarcation functions, prevent collisions between cars, protect the walls of the room. Wheel chippers are installed 1 piece per parking space. Also used as delinators.
The main purpose of the wheel chipper is to increase safety at the facility, so we recommend using anchor bolts for installation(to asphalt surface) or screw-dowel (to concrete surface) complete with washers, for greater fastening strength. You can find them in related products.
Installation steps:
smooth surface
mark holes for anchoring
make high-quality drilling of holes
unscrew the nut from the bolt
put the washer on the bolt from the side where the thread is applied (see mounting diagram)
put the nut on the bolt with the “hat” down, leaving free space for the washer
drive the bolt into the mounting hole of the deliniator / wheel chipper
tighten the nut on the bolt until its “hat” and washer fit snugly against the base of the mounting hole
wheel chuck securely locked
Mounting scheme - in the figure.